Injection Blow Molding Machine
Application Field:
pharmacy industrial
chenical industrial
food pack industrial
cosmetic industrial
Machine advantage:
Clamping parts: special designed single crossbeam dual-cylinder balance clamping system, for fast opening and closing mold while ensuring uniform distribution
Rotation mechanism: unique rotating mechanism design, and equipped with automatic lubrication system,ensure rotation precision be consistent.
Injection components: Alternative efficient plasticizing mixing screw, optimization of the injection unit,improve the injection stability and accuracy in ensuring
Hydraulic system: Equipped with electro-hydraulic servo system, the machine is running stable, low noise, high response and energy saving of 25% to 45%
Rotation mechanism: unique rotating mechanism design, and equipped with automatic lubrication system,ensure rotation precision be consistent.
Preform system | Unit | MSZ30 | MSZ50H | MSZ60S | MSZ95 | MSZ135 | ||||||||||||||
Screw diameter | mm | 40 | 45 | 45 | 50 | 50 | 55 | 60 | 65 | 65 | 70 | |||||||||
Screw L/D | L/D | 23:1 | 23:1 | 23:1 | 23:1 | 23:1 | 23:1 | 23:1 | 23:1 | 23:1 | 23:1 | |||||||||
Shot volume | cm3 | 200 | 254 | 254 | 314 | 314 | 380 | 565 | 660 | 660 | 770 | |||||||||
Injection weight(HDPE) | g | 190 | 241 | 241 | 298 | 298 | 360 | 535 | 625 | 625 | 730 | |||||||||
Max.Screw speed | rpm | 10-225 | 10-235 | 10-235 | 10-235 | 10-235 | ||||||||||||||
Heating capacity | KW | 8.3 | 10 | 10.8 | 12.6 | 15 | ||||||||||||||
No.of heating zone | Qty | 3+N | 4+N | 3+N | 3+N | 3+N | ||||||||||||||
Clamping system | ||||||||||||||||||||
Clamping force of preform | KN | 292 | 500 | 750 | 931 | 1323 | ||||||||||||||
Clamping force of blowing | KN | 46.7 | 89 | 89 | 176 | 235 | ||||||||||||||
Opening stroke of mold planten | mm | 120 | 130 | 140 | 140 | 140 | ||||||||||||||
Lifting H of rotary table | mm | 65 | 70 | 70 | 75 | 75 | ||||||||||||||
Max.Platen size(L×W) | mm | 400×270 | 560×390 | 740×390 | 900×480 | 1400×500 | ||||||||||||||
Min.mold thickness(H) | mm | 180 | 240 | 280 | 280 | 280 | ||||||||||||||
Heating capacity of mould | KW | 3 | 3.6 | 6 | 8 | 10 | ||||||||||||||
Stripping system | ||||||||||||||||||||
Stripping stroke | mm | 220 | 270 | 200 | 240 | 270 | ||||||||||||||
Dry cycle | sec | 3.5 | 3.5 | 3.5 | 4 | 4.5 | ||||||||||||||
Driving system | ||||||||||||||||||||
Motor power | KW | 15 | 22 | 30 | 45+5.5 | 30+30 | ||||||||||||||
Hydraulic pressure | Mpa | 15 | 15 | 15 | 14 | 14 | ||||||||||||||
Product range | ||||||||||||||||||||
Suitable bottle range | ml | 5-800 | 5-800 | 5-800 | 5-800 | 5-800 | ||||||||||||||
MAX.bottle height | mm | ≤190 | ≤200 | ≤200 | ≤220 | ≤220 | ||||||||||||||
Max.Dia.of bottle | mm | ≤100 | ≤100 | ≤100 | ≤100 | ≤100 | ||||||||||||||
Other | ||||||||||||||||||||
Min.air pressure | Mpa | 1 | 1 | 1 | 1 | 1 | ||||||||||||||
Discharge rate of compressed air | m3/mm | ≥0.7 | ≥0.7 | ≥0.8 | ≥1 | ≥1.2 | ||||||||||||||
Water flowage | m3/h | 3 | 4 | 5 | 6 | 6 | ||||||||||||||
Total rated power with mold heating | KW | 26.3 | 35.6 | 46.8 | 71.1 | 85 | ||||||||||||||
Dimension(L×W×H) | M | 3.56×1.25×2.25 | 4.11×1.44×2.5 | 4.3×1.69×2.45 | 4.5×2.1×2.7 | 5.4×2.5×2.9 | ||||||||||||||
Net weinght | ton | 4 | 5.7 | 8.6 | 12 | 15 |